![]() Also included are 2 mating connectors for the sensors making the kit easily serviceable.ĬONTACT US FOR PRIOR TO ANY ORDERS FOR PUMPS,FUEL FEED KIT,FUEL RETURN KIT,DIY WIRING KIT OPTIONS FOR THIS UNIT. The collector box also permits a mounting solution for the OEM fuel level and fuel temperature sensors. Furthermore, all returning fuel from the pressure regulator return and the crossover hose enter the collector box keeping it full. The Radium fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock fuel tank. There are two 1" ball check valves incorporated on the front and rear of the box that serves as trap doors keeping the pump(s) supplied with fuel during aggressive driving. This container is NOT a total solution to fuel starvation, but does improve the fuel supply around the pump(s) inlet. The kit also includes a 2-piece anodized aluminum collector box that sits at the bottom of the OEM fuel tank. The Radium fuel pump hanger includes Radium's own proprietary venturi jet pump with interchangeable orifices to minimize back pressure. When using aftermarket high-flow fuel pumps, the OEM jet pump becomes too restrictive creating unwanted backpressure in the regulator return line causing excessive fuel rail pressure. One of the main issues with the stock Evo X fuel pump hanger is the restrictive return port and venturi jet pump. An electrical bulkhead connector is included for the fuel pump power, OEM level sender, and OEM temperature sensor. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. If using Radium fuel pump hanger return kit 20-0246, use Configuration 4. ![]() Below are some of the more popular ways to configure the Radium fuel rail for the Mitsubishi Evo X. The machined assembly drops-in the factory fuel tank using the OEM hold-down flange. If installing as part of the Evo X Fuel Delivery System, construct the fuel rail as shown in Configuration 4 at the bottom of. ![]() Radium Engineering has already released products specifically for this pump setup. Brushless technology is big leap forward for pumps. The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo X fuel tank. This brushless pump setup is a perfect option for users wanting maximum flow and minimum current. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |